China Water Ring Pump Suitable for Pumping out Gas and Water Vapor Pumping Air Gas and Vapor double pulley

Solution Description

 

Item Description

2BV sequence h2o ring vacuum pump is suitable for pumping out fuel and h2o vapor. The suction force can attain 33mbar absolute force (97% vacuum degree). When the h2o ring vacuum pump works for a extended time when the suction stress is close to the restrict vacuum (saturated vapor strain of operating fluid), its protection pipe shall be linked to safeguard the pump. O2bv collection h2o ring vacuum pump is the most recent technology of power-saving merchandise. With its exceptional performance and many rewards, it will comprehensively replace SK and 2SK series water ring vacuum pumps and W, WY and WL reciprocating vacuum pumps with the very same vitality.

Our Advantages

 

The immediate relationship layout of motor will save place, is effortless to set up and maintain.

all mechanical seals are utilized as sulfur configuration.

there is a cavitation protection pipe interface. If it performs under the limit pressure, open up the cavitation acid pipe interface to eradicate the cavitation seem and safeguard the pump below the issue of making certain the optimum suction furnace.

the entire collection is outfitted with Bu Yu impeller, which increases the corrosion resistance of the pump.

the exclusive adaptable exhaust port style will not shrink, guaranteeing the greatest efficiency of the pump in its efficiency assortment.

Item Parameters

Kind Optimum air volume
mthree/min
Pressure limit Pa energy kW revolution rpm Motor explosion-proof quality H2o usage
L/min
noise dB(A) weight
kg
2BV2060-EX .forty five 3300 1.1 2880 d II BT4 two sixty two 39
2BV2061-EX .87 3300 1.5 2880 d II BT4 two sixty five 45
2BV2070-EX one.33 3300 two.two 2880 d II BT4 two.5 sixty six 66
2BV2071-EX 1.eighty three 3300 three 2880 d II BT4 four.2 seventy two 77
2BV6110 2.seventy five 3300 four 1450 d II BT4 seven sixty three 153
2BV6111 three.eighty three 3300 five.5 1450 d II BT4 8.5 sixty eight 208
2BV6121 4.sixty eight 3300 seven.5 1450 d II BT4 10 69 240
2BV6131 six.68 3300 eleven 1450 d II BT4 fifteen 73 320
2BV6161 eight.3 3300 15 970 d II BT4 20 seventy four 446

 

Thorough Photographs

Vacuum pump is utilized in the area of chemical and pharmaceutical manufacturing unit

Basic Manager Speech

Deeply cultivate the vacuum technological innovation, and investigation,produce and manufacture the vacuum tools to supply the best answer in the vacuum field and make the vacuum application simpler.

Company Profile

ZheJiang Kaien Vacuum Technologies Co., Ltd. is a higher-tech enterprise integrating R & D, production and operation of vacuum equipment. The firm has sturdy complex pressure, exceptional products and considerate soon after-revenue service. The merchandise production method is managed in stringent accordance with IS09001 high quality method. It mainly produces and sells screw vacuum pump, roots pump, claw vacuum pump, runoff vacuum pump, scroll pump, water ring vacuum pump, vacuum device and other vacuum techniques.

New plant plHangZhou

The firm’s products have been for a quantity of foodstuff, medication, refrigeration, drying plants and a quantity of transformer associated gear manufacturers for vacuum gear. The merchandise are commonly utilised in vacuum drying and dehydration, kerosene vapor phase drying, vacuum impregnation, vacuum metallurgy, vacuum coating, vacuum evaporation, vacuum concentration, oil and fuel recovery, and many others.

Higher precision machining tools

The organization cooperates with several scientific investigation establishments and universities, these kinds of as ZheJiang University, China College of petroleum, ZheJiang Institute of mechanical style, and so forth.with faculties and universities to analysis and create main systems, and owns dozens of independent mental property patents.Our technological innovation is major, the item top quality is secure, the merchandise has a very good status in China’s domestic market place, is marketed all over the region, and is exported to Europe, The usa, Africa, the Center East and Southeast Asia,We adhering to the basic tenet of top quality, status and service, the business takes top-edge technological innovation of vacuum pump as its very own duty, and wholeheartedly serves customers of vacuum tools application in different industries with demanding functioning perspective and professional functioning style.

Solution quality wins buyer cooperationIn cargoISO 9001Large tech enterprise certificate

 

US $3,000-10,000
/ Piece
|
1 Piece

(Min. Order)

###

Warranty: One Year
Oil or Not: Oil Free
Structure: Screw
Exhauster Method: Entrapment Vacuum Pump
Vacuum Degree: High Vacuum
Work Function: Mainsuction Pump

###

Customization:

###

Type Maximum air volume
m3/min
Pressure limit Pa power kW revolution rpm Motor explosion-proof grade Water consumption
L/min
noise dB(A) weight
kg
2BV2060-EX 0.45 3300 1.1 2880 d II BT4 2 62 39
2BV2061-EX 0.87 3300 1.5 2880 d II BT4 2 65 45
2BV2070-EX 1.33 3300 2.2 2880 d II BT4 2.5 66 66
2BV2071-EX 1.83 3300 3 2880 d II BT4 4.2 72 77
2BV6110 2.75 3300 4 1450 d II BT4 7 63 153
2BV6111 3.83 3300 5.5 1450 d II BT4 8.5 68 208
2BV6121 4.68 3300 7.5 1450 d II BT4 10 69 240
2BV6131 6.68 3300 11 1450 d II BT4 15 73 320
2BV6161 8.3 3300 15 970 d II BT4 20 74 446
US $3,000-10,000
/ Piece
|
1 Piece

(Min. Order)

###

Warranty: One Year
Oil or Not: Oil Free
Structure: Screw
Exhauster Method: Entrapment Vacuum Pump
Vacuum Degree: High Vacuum
Work Function: Mainsuction Pump

###

Customization:

###

Type Maximum air volume
m3/min
Pressure limit Pa power kW revolution rpm Motor explosion-proof grade Water consumption
L/min
noise dB(A) weight
kg
2BV2060-EX 0.45 3300 1.1 2880 d II BT4 2 62 39
2BV2061-EX 0.87 3300 1.5 2880 d II BT4 2 65 45
2BV2070-EX 1.33 3300 2.2 2880 d II BT4 2.5 66 66
2BV2071-EX 1.83 3300 3 2880 d II BT4 4.2 72 77
2BV6110 2.75 3300 4 1450 d II BT4 7 63 153
2BV6111 3.83 3300 5.5 1450 d II BT4 8.5 68 208
2BV6121 4.68 3300 7.5 1450 d II BT4 10 69 240
2BV6131 6.68 3300 11 1450 d II BT4 15 73 320
2BV6161 8.3 3300 15 970 d II BT4 20 74 446

What Is a Pulley?

The pulley is a wheel mounted on a shaft or axle. Its purpose is to support the movement of a cable that is taut. This cable transfers power to a shaft. However, there are certain safety precautions that you should follow when using a pulley. Read on to learn more! Listed below are common uses and their main parts. Listed below are some of the benefits of using a pulley.
pulley

Common uses of a pulley

A pulley is a common mechanical device used to increase the force needed to lift a heavy object. Most commonly, these devices are used in construction equipment. These machines use high-tension ropes to transfer heavy objects from one floor to another. Other common uses of a pulley include buckets and flagpoles. These devices are extremely useful in a wide range of applications. To learn more about the common uses of pulleys, keep reading.
A pulley is a wheel with grooves for holding rope. Its purpose is to change the direction and point at which a pulling force acts. It is usually used in sets to reduce the amount of force needed to lift a load, but the work involved is similar. Pulleys are also used in rock climbing devices. For many applications, a pulley is a vital part of construction.
The most common use of a pulley involves hoisting and lowering a flag. Other examples include clotheslines, bird feeders, and escalators. Pulleys are also commonly used on oil derricks. Many other common applications include hoisting and lowering garage doors. Pulley systems are also used in engines and cranes. For more information, check out our interactive pulley diagram!
Pulleys can also be used to lower total work required for a task. In many cases, a pulley will consist of two parts: the pulley hub and the shaft pulley. The hub clamps the shaft pulley, while the pulley itself is connected to the motor or other device. If you’re looking for a pulley, it’s important to learn how it works.
The most common uses for a pulley involve lifting heavy objects, and the mechanism used to lift them is known as a pulley. A pulley is an industrial device that uses two wheels to reduce the force needed to lift a weight. The pulley reduces this force by half by allowing the user to pull on the rope four times as far. The pulley also allows for a smaller lifting distance.

Main parts of a pulley

A pulley consists of the main element of a system. This is typically a cable, rope, belt, or chain. There are two basic types of pulleys – a Driver Pulley and a Follower Pulley. Pulleys are available in small and large sizes. The periphery part of the pulley is called the Face, and the protruding middle part is called the Crown. A pulley’s face can be round, rectangular, or even “V” shaped.
The first pulley was created by the Greek mathematician Archimedes in the third century BCE. These simple machines are made of a rope, an axle, and a wheel. The pulley’s end is attached to a person, object, or motor. These machines can be used in various tasks to lift heavy objects. The pulley is a great mechanical advantage for any lifter.
The ideal mechanical advantage of a pulley is defined by the number of rope segments that pull an object. The higher the number of loops on the rope, the higher the mechanical advantage. The greater the mechanical advantage, the less force is required to move the object. Likewise, the greater the distance the rope traverses, the higher the mechanical advantage of a pulley. There are several different types of pulley, depending on their combination of rope, wheel, and rope.
The basic components of a pulley are the face and hub, and the rope is threaded into the center of the pulley. The pulley is usually made of a rope and can be used to lift heavy weights. It can also be used to apply great force in any direction. Step pulleys have multiple faces, which are fixed in sequence. They can also increase the speed of the driven pulley.
A pulley is a simple machine consisting of a wheel, rope, or chain. These parts are crucial for making moving and lifting easier. Because they change the direction and magnitude of force, they can be a useful tool. Some pulleys even change direction. You can learn more about the pulley by downloading this resource today. The resources are designed to support the new 9-1 GCSEs in Design & Technology and Engineering.
pulley

Mechanical advantage

Pulleys have been used to move heavy objects for centuries. When two rope sections are used, the weight of a 100kg mass can be moved with only 500 newtons of force. Adding an extra pulley increases the mechanical advantage. If the pulley has two wheels, the distance between the rope sections and the wheel grooves is only half the distance, but the mechanical advantage still applies. Adding another pulley increases the mechanical advantage, but can be risky.
Mechanical advantage is the ratio of force used versus force applied. The calculations are made under the assumption that the ropes and weights do not elongate or lose energy due to friction. If the weights are very light, the mechanical advantage is greater than that in the real world. To calculate the mechanical advantage, the weight of the load to be lifted must be the same as the weight of the person using the pulley.
A single moveable pulley has a mechanical advantage of two. The weight passes around the pulley, and one end of the rope is attached to a fixed point. The pulling force is then applied to the other end of the rope. The distance the weight travels doubles, or halved, depending on the direction of the pulley. Adding a second pulley reduces the distance and the effort required to lift it.
There are several ways to calculate the mechanical advantage of a pulley system. Some methods are specific to certain types of systems, while others work for all systems. The T-Method is a good choice in many applications, as it calculates the units of tension for each rope segment. Once you have determined the input force, you need to determine the maximum force that will be applied to each component. A compound pulley, for example, will require 4 units of tension for each rope segment.
In simple terms, the effort is the amount of force needed to lift the load. This force is measured in newtons (N). A mechanical advantage is often presented without units. If the student does not have this unit, you may need to convert the units to newtons, since one kilogram is equal to 10 newtons. If you can’t figure out the units of effort, you can use the KWL chart provided by the teacher.
pulley

Safety precautions

There are a few safety precautions you should take when using a pulley. First, always check the SWL (safe working load) before attaching anything to the pulley. This indicates the maximum weight and angle the pulley can safely handle. Second, make sure that your work area is free from people and debris. Third, wear a hard hat to protect your head from blows and falling objects.
Another important consideration is anchoring. Although the pulley reduces the weight of an object, it is not enough to eliminate the weight. This is especially true if you are hoisting a heavy object, such as a motorcycle or lawnmower. It is important to ensure that the anchoring point can support the entire weight of the load. It is also important to follow proper anchoring procedures when using a pulley to lift a motorcycle or lawnmower.
In addition to the safety latch, you should use a tag line to control the suspended load. Remember that a chain pulley block is necessary for vertical lifting. You should also wear personal protective equipment (PPE) while using a pulley to avoid injuries. If your workplace does not have an PPE policy, you should consider implementing a similar policy. These safety guidelines are a good start.
If you are using a pulley to lift heavy objects, make sure to wear gloves. Those who are not familiar with rope-pulling will have an easier time demonstrating how it works. If you are using a rope-pulley system in a classroom, be sure to follow lab safety guidelines. Wear cloth gloves, clear the area, and do not jerk the rope. In addition, never allow yourself to be pulled into the rope by an unfamiliar person.
Another important safety precaution when using a pulley is to ensure that the anchor point for your system is adequate to support the weight of the object being lifted. Check with the manufacturer of the pulley to find out what its weight limit is, as some types of pulleys are designed to lift much heavier weights than others. It is important to follow all manufacturer’s instructions when using a pulley.

China Water Ring Pump Suitable for Pumping out Gas and Water Vapor Pumping Air Gas and Vapor     double pulley	China Water Ring Pump Suitable for Pumping out Gas and Water Vapor Pumping Air Gas and Vapor     double pulley
editor by czh 2022-11-25

Tags:

pulley spacer

As one of leading pulley spacer manufacturers, suppliers and exporters of mechanical products, We offer pulley spacer and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of pulley spacer

Recent Posts