-
8V pulley professional manufacturerTime:[2019-08-24]
QD sets of 3V 5V 8V pulleys are American trough type standards, characterized by compact structure and large transmission power.It is currently widely used in industrial and agricultural production.It has the following characteristics: 1. The transmission power is large, which is the most ideal choice for high-power power transmission. 2. Balance level G6.3, operation more... -
The latest electrophoresis pulleyTime:[2019-08-23]
The surface of the pulley is electrophoresed, beautiful and rust-proof. ... -
Analysis and solution of heating problem of belt pulleyTime:[2019-08-21]
There are many reasons for V-belt heating. The following analyzes one by one and gives solutions. 1. The belt pulley is not assembled in a straight line and is misaligned. The side of the belt is stressed and friction generates heat.Solution: Adjust the installation position of the pulley to ensure the centering, and the heat generation problem can be eliminated. 2.&n... -
QD cone hole 25N triangle belt pulley is used for high-power slurry pumpTime:[2019-08-08]
12-8V2240-N-140皮带轮用于630KW渣浆泵。传递功率630KW.还可以用于传递更大功率的动力设备。... -
Specializing in the production of American standard QD cone sleeve 8V large pulleyTime:[2019-08-05]
Professional design and production of 8V pulley; help design, selection, production and installation. 8V pulley can transmit a lot of power.Up to 1000KW.And it runs smoothly. ... -
Large QD cone sleeve 8V pulley customizationTime:[2019-08-04]
Undertake large-scale pulley selection, design, production, installation and other services. ... -
Large QD cone sleeve 8V pulley customizationTime:[2019-08-04]
Undertake large-scale pulley selection, design, production, installation and other services. ... -
Ever-Power pulleyTime:[2019-07-31]
Ever-Power Group specializes in the production of 8V pulleys with complete specifications and good service. Welcome to visit us. ... -
Why does the V-belt get hot?Time:[2019-07-27]
The reason for the heating of the V-belt is as follows: the two pulleys are not aligned during the first assembly. During transmission, the side of the belt groove is stressed and friction generates heat.The tension of the second belt is not enough, the belt slips, and heat is generated.The third belt is oily, the belt is slipping, and friction generates heat.The fourth selection is improper, overloaded... -
Why use 8V grooved leather for high-power transmission equipmentTime:[2019-07-19]
The 8V groove type is an American standard. After China introduced it, it was renamed 25N. It is the V-belt with the largest transmission power in the world so far.Its single transmission power is 2.7 times that of the E-belt with the largest transmission power in the Chinese standard.But its width is only 0... -
Can transfer high-power 8V quick-change pulley photosTime:[2019-07-19]
Technical requirements for belt pulleys of the combined belt 1. The tolerance of the groove spacing is controlled within 0.1.Otherwise, it will cause difficulty in the installation of the joint belt, even if it is installed, it will accelerate the wear of the joint belt, and cause the loss of transmission power and cause vibration. 2. The depth tolerance of the groove must be controlled at 0... -
The latest production of American standard 8V pulley with 10-slot diameter 1600Time:[2019-07-19]
The 8V groove type is an American standard. After China introduced it, it was renamed 25N. It is the V-belt with the largest transmission power in the world so far.Its single transmission power is 2.7 times that of the E-belt with the largest transmission power in the Chinese standard.But its width is only 0... -
8V 16 groove large diameter 1800MM pulley is used forTime:[2019-07-11]
The large-diameter 8V multi-slot pulley can transmit extra large power and is widely used in power transmission on high-power ball mills... -
8V 16 groove large diameter 1800MM pulley is used forTime:[2019-07-11]
... -
Professional pulley manufacturerTime:[2019-07-10]
Specializing in the production of various specifications of pulleys... -
Professional manufacturer of pulleysTime:[2019-07-10]
Specializing in the production of various specifications of pulleys... -
Two sets of 6-slot 25J combined belt pulleysTime:[2019-07-10]
The combined belt pulley can transmit more power than a single belt pulley.It is about 1.25 times the power transmitted by the pulley with the same number of slots. ... -
The latest large diameter 16 groove 8V pulleyTime:[2019-07-10]
The 8V groove type is an American standard. After China introduced it, it was renamed 25N. It is the V-belt with the largest transmission power in the world so far.Its single transmission power is 2.7 times that of the E-belt with the largest transmission power in the Chinese standard.But its width is only 0... -
Specializing in the production of pulley manufacturersTime:[2019-07-09]
Yitong Machinery specializes in the production of various pulleys, including American standard, European standard, and national standard; V-belt; Flat belt; Synchronous belt; V-ribbed belt; ... -
25N pulleyTime:[2019-07-09]
The 8V groove type is an American standard. After China introduced it, it was renamed 25N. It is the V-belt with the largest transmission power in the world so far.Its single transmission power is 2.7 times that of the E-belt with the largest transmission power in the Chinese standard.But its width is only 0...